Categories
Hull Assembly

Buttoning up the Bow

Before the final hull side pieces can go on I need to install the bow deck. This means I need to get the forward compartment filled with foam, bow eye ready for install, and then get as much work complete in the forward storage area as I can before the space gets really cramped. Forward […]

Categories
Hull Assembly

Stitching the Bow

Bringing the two bottom hull panels together at the bow was a bit of a chore. A note about the image at the top of this post : All those bulkheads are not glued in at this point. I just had them sitting there for dry fitting. Pulling the Bow Tight In short, I did […]